Description
The system consists of the OVIO® profile section and the OVIO® clip.
The OVIO® profile section forms the framework that the canvas is attached to.
The OVIO® clip makes it possible to stretch the canvas in the frame using a special key.
Avantages
Design > Aesthetic and discreet
Easy > Easy to build and install
Strong > Excellent mechanical resistance
Technical data
OVIO® profile sheet: aluminium
OVIO® Clips: high-resistance polymer
Point resistance: 820 N
Usage temperature: from -35°C to +80°C
Technical sheets
Instructions
To assemble the frame
- Cut the section to the dimensions of the required frame.
- Assemble these uprights with the OVIO® joining pieces using a 10 key.
- In the event of external use, drill holes for draining water in the lower horizontal upright.
- Attach the frame to the wall or on a pole (see pole guide).
N.B. Provide an attachment point a minimum of every 3 metres.
Prepare the canvas sheet
The size of the sheet will be equal to the overall size of the frame minus 10 cm.
Example: OVIO® frame 5 x 2 m > sheet 4.90 x 1.90 m (including the 8 cm lost edge around the perimeter).
The sheet will include eyelets with an inner diameter of 15 mm, every 40 cm around the perimeter.
The eyelets will be placed 8 cm from the corners.
Installing the OVIO® clip
Installation and stretching of the sheet in the OVIO® profile section
OVIO® Components
| COMPO. |
CODE |
DESCRIPTION |
| 1 |
OVP PROFILE 1.2 |
OVIO® Profile section, length 6 metres |
| 2 |
OVP CLIPS |
OVIO®, Clips, 1 set of 2 pieces
to interlock the sheet to the profile section |
| 3 |
OV KIT ANGLE 90 |
OVIO® attachment kit for 90° angle |
| 4 |
OV KIT JONCTION |
OVIO® attachment kit for joining 3 profile sections on the same frame |
| 5 |
OVP RACCORD ACCESSOIRE |
OVIO® fastener for attaching an
accessory to the profile section |
| 6 |
OVP PLATE |
OVIO® floor support, diam. 40 cm
for self-supporting indoor frame |
| 7 |
OVP KEY |
OVIO® key for putting the sheet
in the profile section and disassembling it |
| 8 |
OVP CIRCULAR SAW |
Circular saw for cutting the
OVIO®
profile section at a 45° or
90° angle |
| 9 |
OV HQI 150
+ 50 C SIGNPOST |
HQI 150 w spotlight mounted
on
OVIO® 50 cm overhead signpost |
Mounting on wall
Mounting on poles
